| |   With a straight through silencer design for easier engine breathing for maximum performance, and that deep power sound. They are constructed from heavy gauge steel with 360 degree welded ends. With glass packing and a heat resistant cherry red finish.
There is a particular design explanation why Cherry Bombs have been so popular for so long: Almost any half-decent exhaust will improve horsepower over mass produced, often crude, factory systems, Cherrys go one step further by also producing a unique sound by deadening the higher tinnier exhaust notes but allowing the deeper bass tones to come through - making every motor sound throatier and deeper than with another silencer.
These silencers (when mated with the appropriate tubing) enable owners to design and construct their own system, or just change their backbox
see here for cut away views explaining this design feature & fitted photos(Code: 262) |
|
| |   Want a sticker for your cherry bomb?
Measures 103mm by 546mm
Free when you buy a cherry bomb, just add it to your cart. 1 per cherry purchased.(Code: 854) |
|
| |   Makes fitting easy
Suits all cherry bombs & tail bombs including oval(Code: 267) |
|
| |   Silencer body width 75mm (3")
Length including fitting sleeves 18" (460mm). Length excluding fitting sleeves 12" (305mm)
Inlet & outlets constructed with a built in a stepped sleeve reducer at 38 and 45mm | Discount on quantity | | From | 5 | | Discount | 20.00% |
(Code: 265) |
|
| |   Silencer Body Width 100mm (4")
71mm inlet and outlet
16" long excluding fitting sleeves| Discount on quantity | | From | 5 | | Discount | 20.00% |
(Code: 1013 71) |
|
| |   Silencer body width 128mm (5")
96mm inlet and outlet
16" long excluding fitting sleeves| Discount on quantity | | From | 5 | | Discount | 20.00% |
(Code: 1014) |
|
| |   This is the final section of your custom-built road or competition exhaust system.
This item is supplied with a rolled end which is suitable for SVA testing on kitcars
Overall length 483mm
Inlet width 38-45mm (stepped sleeve)
Silencer width 90mm
Tailpipe width 65mm
Chrome plated or stainless rolled tailpipe section(Code: 120C) |
|
| |   This is the final section of your custom-built road or competition exhaust system.
Overall length 483mm
Inlet width 38-45mm (stepped sleeve)
Silencer width 90mm
Tailpipe width 85mm
Chrome slashcut oval tailpipe(Code: 266) |
|
| |   Choice of length as below
Inlet and outlet width 50 - 57mm (choice)
Silencer body width 75 mm (3")
Custom made to order - please allow 10 days before despatch(Code: 264 50 12) |
|
| |   Choice of length as below
Inlet and outlet width 50 - 65mm (choice)
Silencer body width 100mm (4")
Custom made to order - please allow 10 days before despatch(Code: 263 50 12) |
|
| |   Choice of length as below
Inlet and outlet width 50 - 94mm (choice)
Silencer body width 128mm (5")
Custom made to order - please allow 10 days before despatch(Code: 684 50 12) |
|
