| |   Registration plate lamp. Also has a multitude of other uses (guage illumination, glovebox, engine compartments, RV steps etc)
1-1/2" Diam x 2" L; Chrome-plated housing; replaceable bulb; snaps into required 1-1/4" mounting hole; 1-wire; 1-bulb incandescent
Snap-In License Plate, Utility or Dash Light - Chrome-Plated
A round, chrome-plated light that can be used as a license plate, utility, or dash light. The light measures 1-1/2" in diameter by 2" long. This domed light has a chrome-plated top half; the bottom half is a white lens with a replaceable bulb. The light snaps into place with a 1-1/4" mounting hole. The light contains a single lead wire for power and is grounded through the mounting hardware.
White light used for license plate, utility, dash light etc
- Dome-like, chrome-plated housing
- Replaceable bulb
- Mounts by snapping into a 1-1/4" mounting hole
- Single-wire design grounds through mounting hardware
- Dimensions: 1-1/2" Diam x 2" L
USA sourced
Instructions supplied (Code: 934) |
| | |   12-volt courtesy light for general illumination.
Suits courtesy lamp, camper van interior, engine or glovebox illumination etc.
Features black housing, rocker switch, and aluminum base.
Surface mounts on 2 1/8" centers.
Separate lead and ground wires for electrical connection.
Supplied with fittings
USA sourced
Supplied with instructions (Code: 936) |
| | |   ABS Reproduction of the Lucas L467 plate lamp as fitted a wide selection of classics including:
AC Cobra
Austin A30/35/40/90, Mini
Austin-Healey 100-4, 100-6, 3000, Sprite through 1969
Daimler SP250
Hillman Minx
MG TD, TF, MGA, Midget through 1969, MGB w/dual number plate lamps
Morgan 4/4, 1951-67
Morris Minor, Mini
Rover 75, Landrover 2/3 1963-74
Singer 1951-56
Triumph TR3, Herald, Vitesse, GT6 & Spitfire through 1969
This is a plastic bodied reproduction of the Lucas L467 lamp, Unipart number 127916. Supplied complete with bulb
Also E-marked & suitable for IVA test
Available in chrome or black
(Code: 351/P) |
| | |   These innovative custom lights look like, and perform the function of, standard bolts but have small 12-volt high-intensity LED lights inside that shine through letter-box slot for plate illumination.
Measure 5/16" UNF 18 TPI, 5/8" head (15mm).
Available in stainless steel or satin black
As you can imagine they have a multitude of other uses (gauge illumination, glovebox, engine compartments, RV steps etc)
Sold individually
| Discount on quantity | | From | 10 | | Discount | 20.00% |
(Code: 537SS) |
| | |   Registration plate lamp. Also has a multitude of other uses (guage illumination, glovebox, engine compartments, RV steps etc)
2-9/16" L x 1-3/16" W x 15/16" D; Weather-tight seal w/gasket; chrome-plated housing; surface mount on 2" centers; 2-wire;
This is an license plate mini-light on an ear-mount base. The light measures 2-9/16" long x 1-3/16" wide x 15/16" deep. The light includes a gasket for a weathertight seal against the elements. This light has a polished, chrome-plated housing. This light mounts on 2" centers. The two-wire design includes the lead and ground wires to mount to any surface.
- Mini license plate light on ear-mount base
- Gasket is included to create weathertight seal
- Polished chrome finish on durable housing
- Surface mounts on 2" centers with ear-mount base
- Two-wire design includes lead and ground wires for mounting to all surfaces
- Dimensions: 2-9/16" L x 1-3/16" W x 15/16" D
- Either wire on back of light can be used for ground
Manufacturer Specifications
Mini license plate light features polished, chrome-plated housing. Mounting ears for surface mount. Design includes both lead and ground wires for mounting to all surfaces.
USA sourced
(Code: 933) |
| | |   Self contained LED lamps.
Chrome plated housing. Waterproof. 24 high-intensity LEDs per lamp
Usually seen on custom Harleys and choppers but universal 12volt fitment for car or motorbike
Ive used a pair of white ones for reverse lamps and red for fog to good effect on my 64 Galaxie where their slim profile makes them unobtrusive.
Small & bright 36w equivilent. Measure approx 85mm long by 30mm diameter.
Choice of colour
Sold individually (Code: LBL) |
| | |   Chrome cover only for Lucas L467 (127916) plate lamp.
Chrome, nickel, brass, steel construction
This lamp was fitted a wide selection of classics including:
AC Cobra
Austin A30/35/40/90, Mini
Austin-Healey 100-4, 100-6, 3000, Sprite through 1969
Daimler SP250
Hillman Minx
MG TD, TF, MGA, Midget through 1969, MGB w/dual number plate lamps
Morgan 4/4, 1951-67
Morris Minor, Mini
Rover 75, Landrover 2/3 1963-74
Singer 1951-56
Triumph TR3, Herald, Vitesse, GT6 & Spitfire through 1969
Note that you are purchasing the chrome cover only
(Code: 782/C) |
| | | Lucas Type L467 (127916) plate lamp
Chrome, nickel, steel, brass construction
Originally fitted to a wide selection of classics including:
AC Cobra
Austin A30/35/40/90, Mini
Austin-Healey 100-4, 100-6, 3000, Sprite through 1969
Daimler SP250
Hillman Minx
MG TD, TF, MGA, Midget through 1969, MGB w/dual number plate lamps
Morgan 4/4, 1951-67
Morris Minor, Mini
Rover 75, Landrover 2/3 1963-74
Singer 1951-56
Triumph TR3, Herald, Vitesse, GT6 & Spitfire through 1969 (Code: 782) |
| | |  
2 Pivot points with hold points - double joint allows beam to shine at any angle - when the lower joint is straight then it turns off automatically
Factory or dealer option on some Triumphs and BMC cars, as well as a part that was widely available in the car accessory shops of the 1960s and 1970s.
Often fitted to period kit cars to help that contemporary look as well as classic campervans and other British classic cars.
(Code: UKC3946) |
|
|
