Discount on quantity | From | 2 | 10 | Discount | 10.00% | 30.00% |
Capillary oil pressure gauge.
Does not require a power supply
Dashboard,
panel or gauge bracket fittings included (including 12v illumination
bulb which obviously does require a power supply).
You will need to reuse your oil supply pipe, or buy a suitable one to fit the tapping in your engine or oil pressure switch
Head diameter 52mm (2")
Covers range 0-80 psi (0-6 kgscm)
Stainless steel, steel, copper, PVC construction
We are asked quite a few questions about this competitively-priced gauge:
Please
note that this is a universal gauge. It is not custom designed to fit
eg a 1972 Mini or a 1981 Ferguson tractor or any other specific make and
model. It will fit any vehicle or other application that has a suitable
space to mount it or you will need a gauge holder (such as we sell). It is not designed as a straight swap for any
gauge you already have although this may very well be the case. It is
designed to fit in a 2" hole which is the same size as almost all
ancillary gauges ancient or modern. You will need to work out the
electrical wiring required to make it light up yourself (it just needs a
power and an earth supply). You will need to supply a capillary pipe to
feed the oil to the gauge, or reuse your old one if available. If you
wish to fit this gauge in addition to an oil pressure light then you
will need a T-piece unless you have an alternative threaded tapping in
the engine somewhere. It is supplied with specifications listed on the
box (as we have listed above) but its not possible to supply
fitting instructions as fitting instructions would depend on how and
where you wanted to fit it.
|