| |  These items make superb presents for any motoring enthusiast.
All are universal application and can be fitted in minutes without any special knowledge or tools.
(Code: p-info) |
|
| |   Supplied with strong self-adhesive backing
Measures approximately 48mm by 80mm, 1.3mm thick(Code: RB Cross) |
|
| |   Supplied with strong self-adhesive backing
Measures approximately 48mm by 80mm, 1.3mm thick(Code: RB Confederate) |
|
| |   Plastichrome, a non tarnishing, non rusting durable material
Supplied with strong self-adhesive backing
Measures approximately 48mm by 80mm, 1.3mm thick(Code: RB Union) |
|
| |   Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep| Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677) |
|
| | Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep | Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677GC) |
|
| |   Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep | Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677/C) |
|
| |   Battery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the green knob and just slightly loosen the green knob to disconnect all power. The green knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt
Click pic for fitted example| Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 182) |
|
| |   Battery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to ring terminal back of the switch
To engage power just hand tighten the purple knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt
| Discount on quantity | | From | 10 | | Discount | 20.00% |
(Code: 182/R) |
|
| |   Power isolator assembly
Installs in line on battery lead or solenoid lead
Suits motorbikes and other vehicles where battery itself is inaccessible or space is tight.
To engage power just hand tighten the knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt
| Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 182IFI) |
|
| |   Best quality enamel die cast badges
Measures 53mm wide, 25mm high, 2mm deep(Code: CFB) |
|
| |   Best quality enamel die cast badges
Measures 53mm wide, 25mm high, 2mm deep(Code: CFB/C) |
|
| |   Cigarette lighter assembly
Both element and housing supplied.
Often supplied as a Tex dealer option on 60s/70s classic cars with part number L15066
Ideal retro fit as a 12 volt power supply (for phone, sat-nav etc) for classic vehicles or as replacement for non-operating unit.
Wire for illumination of ring (if required)
Requires 28mm hole
12volt (Code: 430) |
|
| |   Battery terminal & isolator assembly
Fits small terminal race and motorbike batteries (and other products fitted with motorbike type batteries such as ride on lawn mowers, go karts, buggies etc)
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for any vehicle which are used irregularly as well as any vehicle suffering from a "leaky" earths, slowly draining batteries.
95Amp continuous at 12V, 300Amp momentary (10 seconds)
6 volt or 12 volt
(Code: 182/MB) |
|
| |  40mm diameter x 54mm height. Highly polished wood or soft black leather gear knob. Universal fitting with self cutting nylon insert to match thread on gear stick.
Supplied with a choice of logo (Code: 341) |
|
| |   Universal fit - strong sucker on base operated by turning curled knob. Suitable for all windscreens including curved ones.
Won't blow off in the wind - unlike flimsy "clingfilm" types
Easily removed in seconds should you sell your car
A very smart product which enhances the windscreen appearance of any car, classic or modern
Supplied with a choice of logo - see here for the full range - you will need to specify which logo you require when you check out.
You may wish to display a classic period tax disc on your vehicle
(Code: 38) |
|
| |   Air Horn Kit.
Screamer horns often heard on the continent, especially Italy and featured fitted to the Minis in The Italian Job
Includes:
Twin horns, high and low note, blasting simultaneously.
Compressor, air hose, relay, fittings, mountings, instructions - everything required to fit.
Red plastic bodied trumpets with steel bodied compressor.
12V 124db | Discount on quantity | | From | 2 | 10 | | Discount | 25.00% | 39.00% |
(Code: 154) |
|
| |  
Very neat 5" spot lamps (as fitted to BMW Mini: Mini One, Cooper & Cooper S models including Cabrio 2001 - 2006). Halogen. E Marked
Suitable for standard chrome grill, aftermarket grills may need to be cut.
Sold as a pair (Code: 284C) |
|
| |  Available in alloy or stainless, with or without woodslats. Bar diameter 3/4"
Manufactured in the UK to British Standard ISO9001:2000
Our boot racks will fit a wide range of classics & moderns
No drilling required - fitted in under 2 minutes (Code: 57 1045) |
|
